Product
overview

Oleic acid based potassium soap - 20% active matter

Oleic acid based potassium soap for sisal spinning

BESTERIS EHC is a clear, slightly yellowish, liquid ester. It can be used in the printing industry and as a lubricant.

BESTERIS EHDP is a clear, yellow to brownish, liquid ester. This ester can be used in metalworking fluids, washing & cleaning products, polymers, textile treatment products, dyes, lubricants and greases.

BESTERIS EHL is a clear, slightly yellowish, liquid ester. It is used in the printing industry and as a lubricant.

BESTERIS EHO is a clear, slightly yellowish, liquid ester. This ester can be used in hydraulic and metal working fluids, textile and leather processing aids and crop protection.

BESTERIS EHP is a clear white, slightly yellowish liquid ester. This ester can be used in metalworking fluids and textile processing aids.

BESTERIS EHS is a clear, white to slightly yellowish, liquid ester. This ester can be used as raw material for spin finishes and oiling agent for textile, rubber processing agent, plastic lubricant, paint additive, ink additive, lubricants.

BESTERIS EHT is a clear, yellow to brownish, liquid ester. This ester can be used in metalworking fluids and printing inks.

BESTERIS GMO is a liquid, low HLB non-ionic surfactant used in a variety of applications, e.g. as a W/O emulsifier. It is used in the production of animal feed additives.

The main application of BESTERIS GTH is to mark animal fat derived from catergy I & II animal byproducts.

BESTERIS iBS is a clear light liquid that can be used as a lubricant, metalworking fluid and textile processing aid.

BESTERIS iTDS can be used as a lubricant in the metal working industry and printing industry.

BESTERIS MO is a clear, yellow, liquid ester. This ester can be used as an intermediate for detergents, emulsifiers, wetting agents, stabilizers, textile treatments, plasticizers for duplicating inks, rubbers, waxes etc. It is also used in the production of concrete release agents or demoulding agents.

BESTERIS nBO is used in antistatic lubricant, plasticizer for natural and synthetic defoamers, textile wetting (oiling) agent, used in leather industry, rust inhibitors etc.

BESTERIS NBS is a clear light liquid that can be used as a lubricant, metalworking fluid and textile processing aid.

BESTERIS P4DO is used in PVC plastisols as a viscosity modifier and in metals as a metal working agent and lubricant. It is also used as a defoamer in water treatment.

BESTERIS P4DT is used in metals as metal working agent and lubricant. It is used as an emulsifier in water treatment. The product can also be used as a defoamer in paper industry and water treatment.

BESTERIS P4ML is a surface active agent suggested for use in cosmetic formulations (emulsifier, dispersant), plastics (viscosity modifier), textile chemicals (emulsifier, lubricant) and coatings (emulsifier, pigment dispersant).

BESTERIS P4MO is a surface active agent suggested for use in textile chemicals (emulsifier, lubricant, softener, scouring agent), coatings (emulsifier) and industrial degreasers.

BESTERIS P4MT is a tall oil based surfactant for use in paper defoamer formulations: mineral oil or non-mineral oil based, as an emulsifier. It is also used in coatings : solvent and non-solvent systems as an emulsifier.

BESTERIS P6DO is a surfactant suggested for use in paper defoamer formulations (emulsifier mineral oil or non-mineral oil based), coatings (solvent and non-solvent systems emulsifier) and textile (spin finish lubricant)

BESTERIS P6DT is a tall oil based surfactant. The product is used in paper defoamer formulations: as an emulsifier in mineral oil or in non-mineral based formulations. It is also used in coatings in solvent and non-solvent systems.

BESTERIS P6MO is used as an emulsifier for personal care and as a processing aid in the textile and pulp & paper industry.

BESTERIS SMO can be used in plastics, household products, in coatings and textile and in lubricants.

50 % Calciumstearate dispersion, vegetable stearic acid based

50 % Calciumstearate dispersion, vegetable stearic acid based, extra fine quality - <500 ppm @ 45 µ sieve

50 % Calciumstearate dispersion, for specific concrete chemicals application.

ENSILANE SYNFLO T 7 is a totally water soluble full synthetic lubricant, used as well for wool as for wool/nylon blends. ENSILANE SYNFLO T 7 can be used for dry-spun operations where extremely low oil contents are required.

ENSIWAX CPA-CV is a liquid warp-waxing agent based on synthetic polymers. ENSIWAX CPA-CV can be applied by applicator roll on sectional warping machine. It is especially suited for flax (linen) yarns.

ENSIWAX MC-20 is a weakly colored, liquid warp-waxing agent for cotton, polyester and polyester-cotton yarns. Other synthetic yarns such as polyamide and polypropylene can also be treated with ENSIWAX MC-20.

Fluide HS 60 AS is an all-round 60% silicone emulsion for use on heat-set rotation printing presses.

Silicone emulsion with excellent wetting, lubricating and demoulding effect on plastics. It can also be used as a hydrophobic and protective coating on the surface of paper or cardboard and provides good lubrication properties to glass, plastics, stainless steel, aluminium, steel, and cast iron. This emulsion is FDA-approved for indirect food contact.

Emulsion of polyethylene in water used as coating for paper-based food packaging

Fortal PN 40/Z is an emulsion of polyethylene in water used in many industrial applications. It also gives an increase of the abrasion resistance in silicone emulsions.

FORTAL PN 65/40 is a milky white emulsion based on different modified poly-olefines recommended for the finishing of fabrics, twines and ropes. It is developed to be applied by padding for the finishing of fabrics as well for natural as for synthetic fibres.

FORTAL PN 65/C is a special emulsion produced with selected synthetic raw materials. It is used in many industrial applications and is very useful as release agent during the production of brake linings, brake shoes and clutch linings

Garo® 148 is a self emulsifiable oil, based on a high flash point base oil and contains no water. It can be blended in line or in a water premix to provide dust binding properties in the production and installation of mineral wool. Garo® 148 also gives water repellent properties.

Garo® 217/S is a ready-to-use standard oil emulsion with a high flash point base oil aimed at reducing dust emission during production and installation of mineral wool. Garo® 217/S also provides water repellent properties.

Garo® 6915/B B is an oil in water dispersion that was developed particularly as dust binding agent for mineral wool insulation materials

Release agent for the production of natural latex mattresses and for latex pillows

Release agent for the production of synthetic latex mattresses and blends of natural and synthetic latex mattresses

Release agent for the production of synthetic latex mattresses and blends of natural and synthetic latex mattresses

Release agent for the production of synthetic latex mattresses and blends of natural and synthetic latex mattresses

Black colorant for wood board industry

Black colorant for wood board industry

Black colorant for wood board industry

Red colorant for wood board industry

Non-hazardous green dyestuff for the wood industry, especially for chipboard, MDF and OSB. The dyestuff has a neutral pH.

Non-hazardous green dyestuff for the wood industry, especially for chipboard, MDF and OSB. The dyestuff has a neutral pH.

Non-hazardous green dyestuff for the wood industry, especially for chipboard, MDF and OSB. The dyestuff has a neutral pH.

Aqueous rosin tackifier for car tire textile coatings.

Exclusively vegetable fatty acids, saponified with potassium hydroxide. Brown paste; non perfumed

Impermax® 885/50 C is a paraffin/wax emulsion used in latex systems, especially in the foam backing of carpets and needle felt. It is also used in pulp blends of paper or board, chip board, etc

Impermax® CCA 56/R is an anionic high quality emulsion, which can be used in concrete industry as a retarded surface curing agent, in order to avoid surface cracks in concrete caused by a too quick curing.

Impermax® CCA 56/R V16 is a highly stabilized water based emulsion of a very pure paraffin, for concrete curing, to avoid surface cracks in concrete caused by a too quick curing

Impermax® HC 50 is a non-ionic high quality paraffin emulsion, which can be used in the concrete industry as a retarding surface curing agent, in order to avoid surface cracks in concrete caused by a too quick curing.

Impermax® HWP is a paraffin-wax emulsion used in latex systems and especially in the foam backing of carpets and needle felt. Impermax® HWP contains 60 % of dry matter and is an anionic emulsion.

Impermax® K60/N is a cationic high quality paraffin emulsion, which can be used in the concrete industry as a retarding surface curing agent, in order to avoid surface cracks in concrete caused by a too quick curing.

Impermax®LS 51 is a paraffin-wax emulsion used in latex systems and especially in the foam backing of carpets and needle felt. It gives improved water repellency. Impermax®LS 51 contains 50% of dry matter and is an anionic acid stable emulsion.

Anionic 60% paraffin-wax emulsion used as a hydrophobing agent in wood composite boards.

Anionic 45% paraffin-wax emulsion used as a hydrophobing agent in wood composite boards.

Anionic 50% paraffin-wax emulsion used as a hydrophobing agent in wood composite boards.

Anionic 50% paraffin-wax emulsion used as a hydrophobing agent in wood composite boards.

Anionic 60% paraffin-wax emulsion used as a hydrophobing agent in wood composite boards.

Anionic 50% paraffin-wax emulsion mainly used as hydrophobing agent for medium density fiberboard (MDF).

Anionic 60% paraffin-wax emulsion, especially developed to improve the water repellency of chipboard and oriented strand board (OSB).

Anionic 60% paraffin-wax emulsion (higher viscosity), especially developed for the protection of sawed wood.

Impermax® T950 is a paraffin-wax emulsion used in latex systems and especially in the foam backing of carpets and needle felt. Impermax® T950 contains 60% of dry matter and is an anionic/non-ionic emulsion.

Anionic 60% paraffin-wax emulsion, mainly used as hydrophobing agent for medium density fiberboard (MDF).

Anionic 46% paraffin-wax emulsion, especially developed for the protection of sawed wood.

Mixture of organic polymers and inorganic compounds, giving a synergistic effect towards a long lasting dust binding effect.

Moulding B-ES/LE: is a low viscosity release agent for concrete with a high degree of biodegradability.

Moulding TVS-R1 is a mineral based release agent for concrete. It can be used as a universal release agent for all types of concrete.

Moulding WB 2360 is a 100% mineral based, water miscible release agent for all types of moulds.

Moulding WB 4516 is a natural oil based emulsion for direct and indirect release.

Soapneedles, 80 % palm fatty acid based, 20 % topped cocos fatty acid based

Soapneedles, 100 % tallow fatty acid based

Soapneedles, 80 % tallow fatty acid based, 20 % topped cocos fatty acid based

Nimacoat FA 110 is a water based dispersion which has an excellent hydrophobing effect.

Nimacoat FA 250 is a water based dispersion which has an excellent hydrophobing effect.

Nimacoat FA 2500/S is a water based dispersion which has an excellent hydrophobing effect.

Liquid soap with high viscosity produced from coconut fatty acids, saponified with potassium hydroxide

Liquid soap with a low viscosity produced from coconut fatty acids, saponified with potassium hydroxide.

Marseille Soap Cocos oil based potassium soap with 41% active matter

Cocos/Olive fatty acid based potassium soap with 22% of fatty acids

Liquid soap produced from a mixture of vegetable fatty acids, saponified with potassium hydroxide 20% active matter

Oleic acid based potassium soap with 20% fatty acid - Medium viscosity

Oleic acid based potassium soap with 20% fatty acid - Low viscosity

Liquid soap produced from a mixture of vegetable fatty acids, saponified with potassium hydroxide. 30% active matter

Liquid soap produced from a mixture of vegetable fatty acids, saponified with potassium hydroxide. 40% active matter.

Liquid soap produced from castor oil, saponified with potassium hydroxide

35% silicone emulsion with excellent spreading on application roller. It also performs very well on fast running heatset rotation presses.

30% silicone emulsion for use on fast running offset presses.

Soapflakes, 80 % palm fatty acid based, 20 % topped cocos fatty acid based

Soapflakes, 100 % tallow fatty acid based

Soapflakes, 80 % tallow fatty acid based, 20 % topped cocos fatty acid based

Liquid soap produced from soybean fatty acids, saponified with potassium hydroxide

Open time extender for renderings

Sodium soap based on 100% topped cocos fatty acid

Sodium soap based on 100% palm fatty acid

Sodium soap based on 80% palm fatty acid and 20% topped cocos fatty acid

Sodium soap based on 100% tallow fatty acid, extra dry

Sodium soap based on 100% tallow fatty acid

Sodium soap based on vegetable fatty acids with low titer

Sodium soap based on 80% tallow fatty acid and 20% topped cocos fatty acid