Home » Industry: Construction

Industry: Construction

square
cross
circle

Industry: Construction

Concrete curing
The Impermax® product range includes highly stabilized and homogenized waterbased emulsions of selected waxes for curing compounds as manufactured and supplied by concrete admixtures manufacturers. The standard range consists of cationic, anionic and non ionic emulsions. They provide a good basis for the curing compound to achieve improved water retention. The Impermax® range of products is a reference as a basis for the final Concrete Curing formulation to be applied as a coating or finishing film upon the freshly poured concrete.

Concrete admixture
Our range of additives for concrete can be found below.

Release / De-moulding agent

Govi manufactures a wide range of release agents for the construction industry and other applications under the brand name “Moulding”.
The “Moulding” range consists of products based on conventional mineral oils, but also on vegetable oils and combinations of both. Following the market trend, GOVI is focusing on solvent-free formulations. Products can be formulated according to specific demands.

Esters can also be used in the production of concrete release agents or demoulding agents.

For your convenience we have divided this industry into subcategories or application. Click on a button below to narrow down the product selection below.
AllConstructionConcrete curingConcrete admixtureRelease / De-moulding agent

BESTERIS EHC

Products

Product code
SD07550 - SD07570
CAS number
92044-87-6
Description
BESTERIS EHC is a clear, slightly yellowish, liquid ester. It can be used in the printing industry and as a lubricant.

BESTERIS EHO

Products

Product code
SD07470
CAS number
26399-02-0
Description
BESTERIS EHO is a clear, slightly yellowish, liquid ester. This ester can be used in hydraulic and metal working fluids, textile and leather processing aids and crop protection.

BESTERIS EHT

Products

Product code
SD07460
CAS number
85049-37-2
Description
BESTERIS EHT is a clear, yellow to brownish, liquid ester. This ester can be used in metalworking fluids and printing inks.

BESTERIS MO

Products

Product code
SD08010 - SD08020
CAS number
68990-52-3
Description
BESTERIS MO is a clear, yellow, liquid ester. This ester can be used as an intermediate for detergents, emulsifiers, wetting agents, stabilizers, textile treatments, plasticizers for duplicating inks, rubbers, waxes etc. It is also used in the production of concrete release agents or demoulding agents.

BESTERIS P4MO

Products

Product code
SD10610
CAS number
9004-96-0
Description
BESTERIS P4MO is a surface active agent suggested for use in textile chemicals (emulsifier, lubricant, softener, scouring agent), coatings (emulsifier) and industrial degreasers.

BESTERIS SMO

Products

Product code
SD08150
CAS number
1338-43-8
Description
BESTERIS SMO can be used in plastics, household products, in coatings and textile and in lubricants.

Chriscoat 50EF

Products

Product code
SD602V
Description
50 % Calciumstearate dispersion, vegetable stearic acid based

Chriscoat 50EF

Products

Product code
SD613
Description
50 % Calciumstearate dispersion, vegetable stearic acid based, extra fine quality - <500 ppm @ 45 µ sieve

Chriscoat CR25EF

Products

Product code
SD608
Description
50 % Calciumstearate dispersion, for specific concrete chemicals application.

Impermax® CCA 56/R

Products

Description
Impermax® CCA 56/R is an anionic high quality emulsion, which can be used in concrete industry as a retarded surface curing agent, in order to avoid surface cracks in concrete caused by a too quick curing.

Impermax® CCA 56/R V16

Products

Description
Impermax® CCA 56/R V16 is a highly stabilized water based emulsion of a very pure paraffin, for concrete curing, to avoid surface cracks in concrete caused by a too quick curing

Impermax® HC 50

Products

Description
Impermax® HC 50 is a non-ionic high quality paraffin emulsion, which can be used in the concrete industry as a retarding surface curing agent, in order to avoid surface cracks in concrete caused by a too quick curing.

Impermax® K60/N

Products

Description
Impermax® K60/N is a cationic high quality paraffin emulsion, which can be used in the concrete industry as a retarding surface curing agent, in order to avoid surface cracks in concrete caused by a too quick curing.

Moulding B-ES/LE

Products

Description
Moulding B-ES/LE: is a low viscosity release agent for concrete with a high degree of biodegradability.

Moulding TVS-R1

Products

Description
Moulding TVS-R1 is a mineral based release agent for concrete. It can be used as a universal release agent for all types of concrete.

Moulding WB 2360

Products

Description
Moulding WB 2360 is a 100% mineral based, water miscible release agent for all types of moulds.

Moulding WB 4516

Products

Description
Moulding WB 4516 is a natural oil based emulsion for direct and indirect release.

Nimacoat FA 110

Products

Description
Nimacoat FA 110 is a water based dispersion which has an excellent hydrophobing effect.

Nimacoat FA 250

Products

Description
Nimacoat FA 250 is a water based dispersion which has an excellent hydrophobing effect.

Nimacoat FA 2500/S

Products

Description
Nimacoat FA 2500/S is a water based dispersion which has an excellent hydrophobing effect.

Tiacoat FA 35

Products

Description
Open time extender for renderings